The 261 LED Series is a product designed specifically for Paint Spray Booths. These 4 lamp 4’ fixtures are available with LED T8 replacement lamps. This fixture can be built with low, standard and high ballast factor ballasts and are available with 4000 and 5000K LEDs. The 261 Series is a rear access only fixture and does not require paint spray cutoff. This unit carries multiple listings from ETL for Class I Div. 2 & Class II Div. 2 applications. Must be mounted hinge side up. LED lamps included.
20 Gauge steel construction with white power coat
which creates a durable, highly reflective finish.
Rear access only
40% + energy savings compared to F32 T8 fluorescent lamps
L: Low Ballast Factor Ballast 50 watts
(5600 - 5800 lumens)
S: Standard Ballast Factor Ballast 58 watts
(6400 - 6600 lumens)
H: High Ballast Factor Ballast 74 watts
(7400 - 8000 lumens)
120 - 277 Volt
Normally open magnetic switches are intended to be used to trigger a relay
(furnished by others) which disables the paint system. Because of the small
capacity of the switch a solid state relay is recommended. It may be desired
by others to utilize a separate power supply to segregate the relay
(furnished by others) from the lighting power supply.
The magnetic switch IS NOT designed to directly control light operation!
The magnetic switch is rated for 10 watts resistive at a maximum of 300 VAC.
Overloading the switch circuits WILL cause failure.
we recommend having a certified electrician/engineer review
loads to ensure that overloading of switch does not occur.
UL / Class Listings
- Class I Division 2
- Class II Division 2
Series: 261 LED
Options: 260/261 LED - Source
- H: High ballast factor
- L: Low ballast factor
- S: Standard ballast factor
Options: 260/261 LED - CCT
- 4: 4000K
- 5: 5000K
- 5901: 8 Ft. 3-wire whip (261) Included
Must Ship via Freight Truck Due to Size and Weight